26/1205 840

classifieds board Namco Forklift for sale!We have had this unit for 8 years and it has served us well.  When we bought it (Bill of Sale) it had a huge grapple on the front of it.  We removed the grapple and bought these forks for $4,000 from a salvage dealer yard in Virginia. They are 165" long.  If you lower the mask all the way to the ground, the forks slip right off allowing you to drive without them.  This is a articulating loader that is all hydraulic.  The 3 cylinder Diesel Engine turns a hydraulic pump that in turn supplies the different pistons and drive motor.  We replaced the main mast piston about 2 years ago.  We have replaced about half the hydraulic lines over the years.  The drive motor has two speeds a low and high.  About 3 years ago the high stopped working.  I think it is in the switch because my mechanic was able to make it either high or low speed and I selected the low speed.  The engine is air cooled...someone told me it was a German manufactured engine but I don't remember the name.  No Hydraulic leaks.  It is a 4 wheel drive unit but one of the driveshafts has been removed.  It is included with the purchase but not installed in the machine.  We removed it when we replaced the Hydraulic pump about 3 years ago because the company that did the work said the differential in that axle was bad and recommended just driving off the one axle.  So even though it is a 4 wheel drive unit the last several years it has been used as a 2 wheel drive.We filled the two rear tires with lime juice to add additional counter weight so you can pick up heavier cars without the rear tires coming off the ground.  You can pickup a crew cab truck if you get it from the side but not lengthwise.You are welcome to come inspect or test drive.  Sold AS IS.  We can assist with finding a transporter if you need it shipped.  Sold on a bill of Sale.

Also published on classifieds board.