Big Joe PDH-40-106; PDH40

Hello! We are liquidating assets from PERRIGO Corp. They take very good care of all their equipment so you will never find better used items. Take advantage of the tremendous savings for your Company! This listing is for 1 - BIG JOE ELECTRIC FORKLIFT 4,000Lb CAPACITY PDH-40-106 42" FORKS 106" LIFT HEIGHT. As stated it is a Big Joe Electric straddle lift. This is the Big boy! The highest lift capacity they make at 4,000lbs! You can read the specs and features below. These start at 19,000 bare bones. It only has 3506 hours on it. The battery will only charge to about 80% but it doesn't hold there long and drops down to 50 or so rather quickly. I will try to reconditioned it a little to improve performance but it would be best to buy a new one at some point and then you have a tremendous asset for your company that will last it's lifetime. It still functions great. It has 3 speed forward and one reverse. It comes with a 12v charger. You would be best to pick this up as it's roughly 3,000lbs but if need be I could check on delivery option for you. A great deal! Feel free to make a reasonable offer. Buy with confidence as we have excellent feedback and offer lightening fast service. Message with any questions and be sure to browse our other items. Thanks! PDH 40-106 Big Joe PDH Heavy Duty Straddle Lift Truck Model: PDH 40-106 Capacity: 4,000 lbs Lift height: 106" Mast collapsed height: 71.5" Mast... $19,165.30 Big Joe PDH Heavy Duty Straddle Lift TruckModel: PDH 40-106 Capacity: 4,000 lbs Lift height: 106" Mast collapsed height: 71.5" Mast extended height: 123"Battery and charger included Telescopic mastClass II ITA fork carriage: 20" x 32" wideBig Joe PDH Power Drive StackerThe PDH Walkie Stacker series has many of the capabilities of a rider. Long duty cycles over multi-shift operations, capacity for heavy loads - up to 4,000 pounds - the ability to operate in narrow aisles and other congested areas not normally accessible to riders. And because it is a Walkie, it costs significantly less.  The PDH Stacker is effective for special applications requiring hydraulic attachments. These include devices like side shifters, roll clamps, carton clamps, and die pullers. The design and construction of this series makes it ideal for use in extreme industrial environments such as foundry's and freezers. LOOK ON THE INTERNET FOR THE PDF WITH ALL THE SPECS AND FEATURES

Also published on classifieds board.