Jcb 531-70

classifieds board HEAVY-DUTY AXLE

Heavy-duty axle feet help the JCB 531-70 Construction Loadall telehandler to absorb the immense stresses generated during continuous heavy material rehandling applications, while a one-piece fully welded chassis maximises strength and minimises weight.  

There’s a tough U-shaped boom pressing with fully welded closing plates. For extra strength, there are large boom overlaps of up to 1.0m; we’ve also reduced joints and stress points across our integrated boom nose and one-piece closing plate.  

To provide long-term corrosion protection, we dip JCB Construction Loadall cabs in electrophoretic ally prior to painting. Keyhole castings hold the tilt and extension rams in place to further improve overall structural integrity.  

Hydraulic hoses are intelligently routed through the boom for maximum protection; the bonnet is side-mounted, which protects it from site damage; and rear lights fold up to keep them clear and well protected from damage when working on site.  

The boom on a JCB 531-70 Construction Loadall telehandler is mounted low in the chassis, providing an extremely rigid structure and maximum over-the-shoulder visibility.  

The new Construction Loadall range’s stringent testing programme has included prolonged high stress loading of the chassis, boom and other key components, as well as repeated transmission use over thousands of cycles.  

Optional front and top screen roof guards offer additional protection from falling debris.

Dimensions ALength To Fork Face16.38ft inEGround Clearance1.32ft inBWidth Over Tires7.32ft inCOverall Height8.17ft inDWheelbase9.03ft inDump Angle37.5degreesTurning Radius Outside Tires12.14ft inWeight15564.64lbLift FMax Lift Height22.97ft inGMax Forward Reach12.14ft inMax Lift Capacity6988.66lbMax Load At Max Height2400lbMax Load At Max Reach1250lbSpecificationsEngine Number Of Cylinders

4

Engine Make

2257

Engine Model

JCB EcoMAX T4i/IIIB

Gross Power63hpPower Measured @2200rpmMax Torque320lb ftTorque Measured @1200rpmDisplacement268.6cu inAspiration

Naturally Aspirated

Operational Operating Weight15215lbFuel Capacity39.1galHydraulic System Fluid Capacity29.9galOperating Voltage12VAlternator Supplied Amperage95ampsTire Size

15.5/80-24

Transmission Lift Capacity To Full Height5291.1lbLift Capacity At Full Reach2755.8lbTransmission Type

Powershift transmission incorporating torque converter

Number Of Forward Gears

4

Number Of Reverse Gears

4

Max Speed - Forward17mphMax Speed - Reverse17mphHydraulic System Bucket Crowd2.9secRetract5secExtend6.8secMax Operating Pressure

241 bar

Hydraulic Pump

82 L

Hydraulic Pump Type

Two stage gear pump with suctio nstrainer and filter

Pump Flow Capacity43.1gal/minRelief Valve Pressure3500psiHydraulic System Raise Time7.2secDump Time3.5secLower Time5.4sec

We are a small Business licensed in NJ  made up of all family except 2 hired hands so we know what it is to work for supper. It is never our intention to mislead or misrepresent a piece of equipment and we do our best to not waste our customers time or our own. We have a try to use each piece doing something to ensure operations and if we notice something we either list it or we fix it. This is not to say we have never made a mistake, we are human and it is not to say none of our units have never broken, they are machines. We do our best and everyone is encouraged to come inspect and test drive before spending their money. All machines and transactions are complete at the time of the sale and sold as is, where is with no warranty expressed or implied, written or verbal. Pls note we do not guaranty year of the unit hours or miles, hour mile/meters they could swapped changed by previous owners or faulty we take a pics what ever reads on speedometer 
• There are no exceptions. If you think a unit is junk or great please do so before the transaction has been completed or before you bid on our auctions. Again we are a small owner operator business and describe the machines to the best of our knowledge as well as provide a video however ALL equipment is sold as is. Please keep in mind it is used and may have scratches, dings, dents, welds, leaks, minor or major issues, it is not brand new! We are a licensed Business  which means we collect sales tax from NJ buyers unless you are able to provide an exemption number. You may operate the machines on our farm for as long as you would like before any money transfers hands. Failure to comply with terms of sale or failure to pay for a unit in full will result in a $495 restocking fee billed to winning bidders account. By bidding on this unit you have read and agree to all terms of sale and are entering a binding contract. showings are by appointment only
• ALL TEST DRIVES AND INSPECTIONS ARE TO BE DONE BEFORE THE END OF THE AUCTION!
• PAYMENT DUE WITHIN 48 HOURS OF AUCTION END!
• ITEM IS FOR SALE LOCALLY. AUCTION MAY END EARLY!

Also published on classifieds board.