Jlg JLG10-55A

classifieds board  One JLG10-55A Telehandler ready for work, another JLG10-55A Telehandler needs transmission.       Gulf Coast Compression has for sale a 2007 JLG 10,000 lbs. / Telehandler serial number phone with 1,362 hours on the dash meter and 1,443 hours runtime as per John Deere ECU.The John Deere 4045 Powertech Diesel engine is in tip top shape. It starts up quick, with no leaks and runs smooth and quiet. I had John Deere tech preform diagnostics on the engine computer to get the total operating hours and the internal engine condition in March 2020. They showed a steady 63 psi of oil pressure at idle and no fault codes on the engine at 1,443 run hours(picture provided). This unit has been very reliable and trouble free. In year 2007 off-road engines didn't have emission exhaust filters or exhaust recycle valves that always give trouble. If you're looking at this type of equipment you already know that the expected run hours before overhaul should be about 7,000 to 10,000 run hours with good maintenance.          The complete hydraulic system including all cylinders, hoses and spool valves for the boom lift and drop, boom extension and recoil, machine tilt left and right, fork tilt back and forth, left and right stabilizer up and down, two wheel steer, four wheel same direction steer and four wheel opposite direction steer all work flawlessly with only one small oil leak. When you turn the wheel all the way to the left, the steering cylinder seal will leak a drop of oil. I have the seal on order. If it comes in before I sell it, the seal will be replaced.       In March 2020 I did a full inspection and to the best of my ability, these are the items that are not up to standard and need to be addressed for heavy Duty use.The cab seat was removed and needs another. Three of the tires have rubber cut out along the side. However these are foam filled tires and don't have flats. We haven't had any low tire issues during maximum lifts. Also the forks and pin are removed and not included in the sale for liability purposes. Lastly even though it still closes and latches, the engine cover is cracked and a piece of the cover from the bottom is missing. The cover is wrapped around a pipe frame that still closes and latches. So its mostly cosmetics. I suggest bolting in some expanded metal in the open area to make it look better. Other than mentioned above this is a solid machine. The controls to every cylinder works like they should, smoothly with no leaks. The total reach is about 56 feet high.      An identical JLG 10-55A telehandler without the transmission, engine cover, hydraulic oil cooler and front wheels is also included in the sale. The engine runs and it has only has 4,300 hours. This second JLG 10-55A would be a good investment. Parts would cost less than $8,000 and you would have a spare or you could sell outright.      I'm looking to sell fast, so if sold, your payment will have to be made within 2 days. I can store them for as long as three months. All offers will be considered and highest offer after 10 days will be accepted. Both Telehandlers can be put on one flatbed truck and trailer.      The sale of both of these telehandlers will be sold "as is where is" with no warranty. Buyer will be responsible for freight. You are welcome to come work this machine for as long as you like before purchasing. Being sold local so the sale may end before this ad is taken down. Sales price is $30,000 or best offer.

Also published on classifieds board.