Landoll Bendi B40vac Forklift

classifieds board

The Bendi model B40VAC works in aisles as narrow as *72″ (1.8M), has a basic capacity of 4,000 lbs. (1814 kg) at 24″ (600mm) load center and has lift heights available to 30′ (9.14M). This high-performance VNA Model has fast travel speeds and can climb steep ramps. The Bendi B40VAC is a 4-wheel articulating forklift with dual independently driven rear-drive tires and soft-poly front load tires. Excellent traction, braking, and power enable climbing steep ramps with loads. Three masts are available making this unit excellent for loading/unloading trailers and containers. The B40VAC can also work inside and outside on paved surfaces and has a floating front axle allowing the truck to ride smoothly over uneven floors. The Bendi B40VAC does all of the jobs of reach and counterbalanced trucks but in much narrower aisles.

• 4,000 lb. (1814kg) Capacity at 24″ (600mm) Load Center
• Four-Wheel Design, Dual Rear Wheel Drive Provides Excellent Power, Braking, and Traction
• Ergonomic Design for Exceptional Operator Comfort and Safety
• Integral Wide Stroke Sideshifter Makes Placing and Picking Loads Effortless
• Front Wheel Hydraulic Steering Provides Smooth, Reliable, Long-Lasting Steering Control
• Independently Controlled Rear Wheels Allow Independent Speed Control of Each Drive Tire Based on Steering Angle
• Creep Speed Mode Adds Enhanced Control when Handling Loads at High Elevations or While Training Operators
• High Visibility Mast Allows Optimum Safety and Control
• AC Traction and Hydraulic Motors Ensure Minimal Maintenance and High Efficiency
• High-Efficiency Curtis AC Controllers Provide Trouble Free Operation
• Interactive LCD Status Monitor (BDI with Lift Interrupt, Hour Meter with Service Monitor, Diagnostic Code Display, Input Device Calibration)
• 48 Volt Electrical System

• 4,400 lb. (2,000kg) Capacity
• Lift Heights to 417” (10.6M)
• 72” (1.82M) Stacking Aisle
• 8” (200mm) Sideshifter and 36” (914mm) High Load Backrest Standard
• 32” (813mm) Wide Front Axle
• Dual Inside / Outside Capability
• AC Powered
• Optional Cold Storage Conditioned to -22°F (-30°C)
• Large Diameter Smooth Rubber Drive Tires
• Polyurethane Load Tires
• 220° Front-End Articulation / Steering
• Heavy Duty Dual Rear Wheel Planetary Drives
• Powerful Drive and Hydraulic Motors
• Forward and Rearward Mast Tilt
• Heavy Duty Chassis Design
• 220° DuraSteer Articulated Steering System
• Full Diagnostics Dash Display
• Easily Accessible Components for Low Cost Maintenance
• Hydraulic Power Steering
• Comfortable Seated Operation with All Truck Controls in Easy Reach
• 4-Post Heavy Duty Overhead Guard
• Safety Deadman Seat Switch
• Clearview 3-Stage Mast
• Key Switch, Horn, Hour Meter, Adjustable Suspension Seat and Steering Column, Seat Belt and Armrest are Standard
• AC Powered Dual Traction Motor Controller
• AC Powered Hydraulic Pump Motor Controller
• Battery Discharge Indicator with Lift Interrupt
• Lighting and Alarm Accessories Available
• Provisions for RF Terminals Provided

Also published on classifieds board.